Most industrial batteries need to be topped up with water regularly. Tap water is rarely suitable as it often contains a large amount of dissolved solids that can be damaging to your battery. Purchasing bottled water can be costly and inconvenient.
Our HydroPure deioniser turns ordinary tap water into deionised water that is perfect for watering batteries. The low cost deioniser system is not just a filter, which only removes particles, but a real ion-exchange medium which electrostatically removes dissolved impurities. The purity of the water from the HydroPure is comparable with distilled water and each cartridge can produce approx 2400 litres (depending on the quality of the input water).

“Make buying distilled water a thing of the past”

The wall mounted system is easy to install. Simply bolt to the wall and connect to the mains water supply. Featuring a
battery powered “magic eye”, that constantly monitors the conductivity of the output water and clearly signals when it is time to change the cartridge. The cartridge snaps in place in seconds and is non toxic so it can be disposed of easily. This system provides pure water on demand and eliminates the need for purchasing battery water in bulky storage containers. Using deionised water will protect the life of a battery. The HydroPure is the most cost effective and simple way to make sure the water used to fill batteries is as pure as it needs to be.

SPECIFICATION

IMPURITIES REDUCE BATTERY LIFE. Battery water should be free from metallic impurities such as platinum,
manganese, nickel, copper, iron and chloride salts because they can affect cell voltages and self discharge. Also to be limited are calcium and magnesium compounds found in hard water because these may cause mossing and dendrite growth through separators. Note that these impurities are DISSOLVED in the water and cannot be removed by conventional filters.

REMOVES HARMFUL IMPURITIES. Tap water is passed through a cartridge containing beds of cationic and anionic resins
which electrostatically remove impurities. The result is very pure water. When the cartridge becomes exhausted it is simply replaced with a fresh one in seconds using “Quick-Connects”. MONITORS WATER PURITY. Testing tap water chemically is
too complicated. A more practical measure for water purity is resistivity because the electrical resistance of water is very sensitive to the amount of dissolved solids it contains. The HydroPure includes a sophisticated resistivity indicator that can detect when a cartridge needs replacing. The purity light is battery powered so does not need to be connected to the mains electrical supply. The battery lasts for a minimum of 1 year.

SIMPLE INSTALLATION. Installation is completed by attaching the mounting plate to the wall with two bolts and then connecting the input water supply. The HydroPure operates at full mains pressure which makes it possible to dispense pressurised pure water directly from the deioniser.